{"id":2928,"date":"2026-11-13T04:11:48","date_gmt":"2026-11-13T04:11:48","guid":{"rendered":"https:\/\/boshiya.com\/?p=2928"},"modified":"2026-11-13T04:11:48","modified_gmt":"2026-11-13T04:11:48","slug":"direct-reduced-iron","status":"publish","type":"post","link":"https:\/\/boshiya.com\/ja\/blog\/direct-reduced-iron\/","title":{"rendered":"\u76f4\u63a5\u9084\u5143\u9244 (DRI) \u8abf\u9054\u30ac\u30a4\u30c9: \u98fc\u6599\u4ed5\u69d8\u3001EAF \u5145\u96fb\u30d0\u30e9\u30f3\u30b9\u3001\u304a\u3088\u3073\u30ac\u30b9\u30eb\u30fc\u30d7 \u30a8\u30f3\u30b8\u30cb\u30a2\u30ea\u30f3\u30b0"},"content":{"rendered":"<div class=\"seo-blog-content\" style=\"max-width:1040px;margin:0 auto;padding:32px 0;color:#000018;background:#FFFFFF;font-family:Arial,Helvetica,sans-serif;line-height:1.75;font-size:17px;\">\n<p>Direct reduced iron (DRI) is produced by converting iron ore to metallic iron through solid-state reduction below iron\u2019s 1,538 \u00b0C melting point. Mills assessing demand for direct reduced iron need to qualify lower-residual feedstock for the electric furnaces used to melt automotive and flat rolled steels. For engineers assessing a DRI purchase or production process across iron and steelmaking, the practical starting points are <a href=\"#feedstock-engineering\">feedstock qualification<\/a>, the <a href=\"#worked-example-charge-balance\">DRI-to-EAF charge balance<\/a>, and <a href=\"#process-gas-loop-maintenance\">process-gas equipment requirements<\/a>; the cost of the steel being produced depends on gangue chemistry, carbon, discharge temperature and heat-exchanger reliability.<\/p>\n<div style=\"padding:20px;border:1px solid #d9dce2;border-left:4px solid #000018;margin:24px 0;\"><strong>Engineering parameters at a glance<\/strong><\/p>\n<ul>\n<li><strong>Process window:<\/strong> Solid-state reduction of iron oxides to metallic iron at temperatures below the melting point of iron without melting.<\/li>\n<li><strong>Dominant routes:<\/strong> Gas-based vertical shaft furnaces vs. coal-based rotary kilns; metallization depends on process and feedstock.<\/li>\n<li><strong>DR-grade pellet screening:<\/strong> Preferred total iron above 67% and acidic gangue (SiO<sub>2<\/sub> + Al<sub>2<\/sub>O<sub>3<\/sub>) at or below 2% in the cited guide; clustering index tested at 850 \u00b0C per ISO 11256, with commercial limits agreed for the plant.<\/li>\n<li><strong>Commercial forms:<\/strong> Cold DRI pellets (~3.4\u20133.6 g\/cm<sup>3<\/sup>), hot DRI charged to recover sensible heat, and hot-briquetted iron (HBI &gt;5.0 g\/cm<sup>3<\/sup>).<\/li>\n<\/ul>\n<\/div>\n<p>According to Midrex, in 2025 global DRI production was 151.0 million tons, up 7.2% from 140.8 million tons in 2024, with steel plants increasing low-residual metallic feed for electric steelmaking. However, a pellet batch with higher acidic gangue can add extra slag and increase electrical power demand in the melt shop, with the actual penalty depending on gangue composition, iron recovery and furnace operation. Below, our DRI-to-EAF Charge Balance Worksheet quantifies that melt-shop trade-off on a 100-tonne charge basis, while the 3-Zone Gas Loop Fouling Map connects top-gas scrubbing, CO 2 removal, and reformer heat-recovery maintenance to plant availability.<\/p>\n<div class=\"answer-box\" style=\"padding:20px;background:#f3f4f6;margin:24px 0;\">\n<p><strong>Direct reduced iron (DRI), or sponge iron, is a porous solid metallic feedstock produced by removing oxygen from iron ore pellets or lump ore at temperatures below the melting point of iron using reducing gas (H<sub>2<\/sub> + CO) or non-coking coal. Unlike blast furnace pig iron, DRI retains its solid pellet shape and provides low-residual virgin iron for electric arc furnace steelmaking.<\/strong><\/p>\n<\/div>\n<div style=\"padding:20px;border-top:3px solid #000018;margin:24px 0;\"><strong>Key takeaways<\/strong><\/p>\n<ul>\n<li>Gas-based vertical shaft furnaces (Midrex, Energiron) allow control of metallization and carbon content within technology-specific operating ranges.<\/li>\n<li>An increase in pellet acidic gangue (SiO<sub>2<\/sub> + Al<sub>2<\/sub>O<sub>3<\/sub>) requires extra lime flux under a specified slag basicity, raising EAF slag volume and potentially power demand; quantify these effects from the separate oxide assays and a furnace heat balance.<\/li>\n<li>High metallization with insufficient available carbon can weaken the carbon monoxide boil in the EAF bath, degrading foamy slag arc shielding and increasing refractory heat load.<\/li>\n<li>Hot-briquetted iron (HBI) compacted above 650 \u00b0C to &gt;5.0 g\/cm<sup>3<\/sup> ships under IMO IMSBC Code DRI (A), whereas porous cold DRI pellets fall under DRI (B) with strict &le;0.3% moisture and dry-inert-gas rules (nitrogen preferred).<\/li>\n<li>Process gas coolers, CO<sub>2<\/sub> amine reboilers, and reformer waste-heat exchangers experience different fouling mechanisms and can&#8217;t share a single cleaning schedule.<\/li>\n<\/ul>\n<\/div>\n<h2 id=\"what-is-dri\">What Is Direct Reduced Iron (DRI) and How Does Solid-State Reduction Work?<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_01.png\" class=\"wp-image-2919\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Oxygen removal creates porous DRI while gangue remains for steelmaking; IIMA DRI guide.\" \/><\/figure>\n<p>DRI is produced by the reduction of iron ore in the solid state at temperatures below the melting point of iron (1,538 \u00b0C). The production of iron in a direct reduction furnace uses solid-state reduction to produce iron without melting the ore. This involves a counter-current reducing-gas stream of hydrogen and carbon monoxide\u2014or solid carbon derived from coal\u2014to remove oxygen from hematite (Fe<sub>2<\/sub>O<sub>3<\/sub>) to magnetite (Fe<sub>3<\/sub>O<sub>4<\/sub>) and then to w\u00fcstite (FeO). The final reduction step converts w\u00fcstite into metal iron (Fe).<\/p>\n<p>Since oxygen leaves the crystal lattice without melting, each reduced pellet or lump forms an interconnected honeycomb of microscopic pores. Direct-reduced iron possesses this kind of porous microstructure, and because of it, sponge iron is the traditional name of this material in the steel industry. This is also why cold DRI has an apparent density of 3.4\u20133.6 g\/cm<sup>3<\/sup> as compared to 7.8 g\/cm<sup>3<\/sup> of solid iron, as stated in the <a href=\"https:\/\/www.metallics.org\/about-metallics\/dri\/\" target=\"_blank\" rel=\"nofollow noopener\">IIMA DRI specification<\/a>.<\/p>\n<p>Under U.S. federal greenhouse-gas reporting rules in <a href=\"https:\/\/www.ecfr.gov\/current\/title-40\/chapter-I\/subchapter-C\/part-98\/subpart-Q\/section-98.170\" target=\"_blank\" rel=\"nofollow noopener\">40 CFR Part 98 Subpart Q for Iron and Steel Production<\/a>, a direct reduced iron furnace not collocated with an integrated iron and steel manufacturing process falls within the iron and steel production source category; unlike a traditional blast furnace, the direct reduction furnace retains gangue oxides in its solid product. For the broader process overview, including furnace routes, product forms and steelmaking integration, please read our <a href=\"https:\/\/boshiya.com\/blog\/reduced-iron-process-explained\/\" target=\"_blank\">reduced iron process guide<\/a>. This guide focuses on plant equipment selection, feedstock specs, and melting shop integration.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;min-width:640px;border-collapse:collapse;text-align:left;\">\n<caption style=\"text-align:left;font-weight:bold;\">Primary Ironmaking Products Compared: Solid-State DRI vs. Liquid Hot Metal<\/caption>\n<thead style=\"background:#000018;color:#FFFFFF;\">\n<tr>\n<th style=\"padding:12px 14px;vertical-align:top;\">Parameter<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Gas-Based Shaft DRI<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Coal-Based Rotary Kiln DRI<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Blast Furnace Pig Iron \/ Hot Metal<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Physical state at discharge<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Solid porous pellets or lump<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Solid porous sponge iron + char<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Liquid hot metal or solidified pigs<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Operating temperature window<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Solid state; temperature depends on shaft design<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Solid state; temperature depends on rotary-kiln design<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Molten iron; plant-specific tapping temperature<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Primary reducing agent<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Reformed natural gas (H<sub>2<\/sub> + CO) or H<sub>2<\/sub><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Non-coking coal (Boudouard CO)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Metallurgical coke from coking coal + PCI<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Total iron content (Fe<sub>total<\/sub>)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Supplier assay; verify total iron on the agreed basis<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Supplier assay; verify total iron on the agreed basis<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Supplier assay; verify total iron on the agreed basis<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Metallization degree<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Verify product metallization against the purchase specification<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Verify product metallization against the purchase specification<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">~100% (fully reduced liquid metal)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Combined carbon content<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Carbon content adjustable as Fe<sub>3<\/sub>C; confirm the product assay<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Process-dependent; verify total and combined carbon<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">3.5\u20134.5 wt% C (IIMA general pig-iron specification)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Gangue removal stage<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Retained in pellet; slagged in EAF<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Retained in sponge; slagged in EAF\/IF<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Removed as liquid BF slag before BOF<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Residual tramp elements (Cu, Ni, Sn)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Low residuals depend on virgin ore purity; verify each element<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Verify residual elements separately; sulfur pickup also depends on coal<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Low residuals depend on virgin ore purity; verify each element<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2 id=\"shaft-vs-rotary-kiln\">Gas-Based Shaft Furnaces vs. Coal-Based Rotary Kilns<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_02.png\" class=\"wp-image-2920\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"DRI routes need different gas preparation and maintenance; IIMA and Tenova guides.\" \/><\/figure>\n<p>Production of Industrial DRI through different reactor types is driven by local energy economics. There are two dominant reactor types: gas-based vertical shaft furnaces and coal-based horizontal rotary kilns. According to the <a href=\"https:\/\/www.midrex.com\/world-dri-statistics\/world-dri-production-reaches-151-0-mt-in-2025\/\" target=\"_blank\" rel=\"nofollow noopener\">Midrex 2025 World Direct Reduction Statistics<\/a>, world output reached 151.0 million tons in 2025, with MIDREX shaft-furnace plants generating 82.3 million tons, 81.5% of all shaft-furnace production globally, while rotary kilns accounted for the bulk of coal-based output in India and southern Africa.<\/p>\n<h3>How does a gas-based DRI shaft furnace differ from a coal-based rotary kiln?<\/h3>\n<p>A coal-based rotary kiln tumbles ore and non-coking coal horizontally; its product chemistry and throughput depend on the ore, coal and kiln design.<\/p>\n<p>In a gas-based direct reduction plant, iron ore pellets and lump ore descend by gravity through a vertical refractory-lined shaft furnace while hot reducing gas (H 2 + CO derived from natural gas, syngas, or hydrogen) flows upward. The <a href=\"https:\/\/www.metallics.org\/about-metallics\/dri-production\/\" target=\"_blank\" rel=\"nofollow noopener\">IIMA DRI production route comparison<\/a> states that the two major commercial shaft technologies, in the reforming of hydrocarbons to reducing gas, differ in the following ways:<\/p>\n<ul>\n<li>External stoichiometric\/CO<sub>2<\/sub> reformer route (MIDREX): Recycled top gas containing CO<sub>2<\/sub> and H<sub>2<\/sub>O is cleaned, compressed, mixed with fresh natural gas, and heated inside alloy catalyst tubes at the specified reformer temperature to generate a high-reductant gas stream  without requiring an external steam boiler.<\/li>\n<li>Zero-reformer \/ in-situ reforming route (Energiron ZR): Recycled top gas undergoes wet scrubbing and CO<sub>2<\/sub> removal, then mixes with natural gas, oxygen, and steam before entering the shaft at elevated pressure , where metallic iron inside the burden acts as the reforming catalyst under the selected operating conditions.<\/li>\n<li>Coal-based rotary kiln route (SL\/RN, Jindal, Codir): Graded lump ore or pellets, non-coking coal, and dolomite desulfurizer rotate inside an inclined refractory cylinder ; volatiles and carbon monoxide generated via the Boudouard reaction (C + CO<sub>2<\/sub> &rarr; 2CO) reduce iron oxides to metallic iron during the kiln residence time.<\/li>\n<\/ul>\n<p>In a <a href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0959652625000319\" target=\"_blank\" rel=\"nofollow noopener\">2025 Journal of Cleaner Production technical analysis of flexible DRI systems<\/a>, the gas-based shaft reactor is integrated with high-temperature electrolysis for hydrogen production, so specific energy consumption belongs to that integrated system boundary. Coal-based rotary kilns also have energy losses from kiln shell radiation, unburned char, and kiln off-gas. Some recoverable off-gas heat can be used in a waste-heat recovery boiler in the power island.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;min-width:640px;border-collapse:collapse;text-align:left;\">\n<caption style=\"text-align:left;font-weight:bold;\">Engineering Comparison: Gas Shaft Furnaces vs. Coal Rotary Kilns<\/caption>\n<thead style=\"background:#000018;color:#FFFFFF;\">\n<tr>\n<th style=\"padding:12px 14px;vertical-align:top;\">Design \/ Operating Metric<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">MIDREX Shaft Furnace<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Energiron ZR Shaft Furnace<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Coal-Based Rotary Kiln<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Single-module unit capacity<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Specify design throughput and annual operating hours<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">0.25\u20132.5 Mt\/yr (Tenova technology range)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Specify design throughput and annual operating hours<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Shaft \/ reactor pressure<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Low shaft pressure; specify bar abs or barg explicitly<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Elevated shaft pressure; specify bar abs or barg explicitly<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Near atmospheric (slight draft)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Specific thermal energy<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Plant-specific GJ\/t DRI; define the energy boundary<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Plant-specific GJ\/t DRI; define the energy boundary<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Plant-specific GJ\/t DRI; define the energy boundary<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Reducing gas preparation<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">External catalytic CO<sub>2<\/sub>\/steam reformer<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Process gas heater + CO<sub>2<\/sub> removal unit<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">In-kiln coal devolatilization + char gasification<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Typical product carbon<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Adjust to the selected process and EAF carbon balance<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Typically 1.5\u20134.5 wt% C (Tenova)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Adjust to the selected process and EAF carbon balance<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Product sulfur pickup<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Verify ore, fuel and product sulfur assays<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Verify ore, fuel and product sulfur assays<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Verify wt% S; sulfur-bearing coal may require dolomite<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Example maintenance risks to assess for the selected flowsheet<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Reformer alloy tube creep &amp; top-gas cooler fouling<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">CO<sub>2<\/sub> amine reboiler fouling &amp; process heater duty<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Fayalite (2FeO&middot;SiO<sub>2<\/sub>) accretion ring build-up<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>For a broader comparison of how the iron production route integrates with electric mini-mills versus blast-furnace integrated steelworks, see our analysis of <a href=\"https:\/\/boshiya.com\/blog\/mini-mill-vs-integrated\/\" target=\"_blank\">mini-mill versus integrated steel mill architectures<\/a>.<\/p>\n<h2 id=\"feedstock-engineering\">Feedstock Engineering: DR-Grade Pellets vs. BF-Grade Pellets<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_03.png\" class=\"wp-image-2921\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Qualify chemistry, size, strength and clustering; IIMA ore guidance and ISO 11256:2015.\" \/><\/figure>\n<p>A direct reduction process uses pelletized iron ore or natural lump ore with a well-defined chemical composition and high mechanical strength. Because solid-state reduction doesn&#8217;t melt the burden or tap a separate ironmaking slag, most of the silica (SiO<sub>2<\/sub>), alumina (Al<sub>2<\/sub>O<sub>3<\/sub>), phosphorus and titanium entering the shaft furnace exits through the sponge iron and reports directly to the steelmaking furnace.<\/p>\n<p>As reported in <a href=\"https:\/\/www.spglobal.com\/energy\/en\/news-research\/blog\/metals\/062222-dri-steel-decarbonization-direct-reduced-iron\" target=\"_blank\" rel=\"nofollow noopener\">S&amp;P Global\u2019s analysis of DR-grade pellet supply constraints<\/a>, direct-reduction quality depends on securing suitable high-iron, low-gangue feed; an <a href=\"https:\/\/www.midrex.com\/direct-from-midrex\/technical-articles\/the-iron-ore-challenge-for-direct-reduction-on-road-to-carbon-neutral-steelmaking\/\" target=\"_blank\" rel=\"nofollow noopener\">IIMA-authored guide published by Midrex<\/a> lists preferred Fe above 67% and combined SiO<sub>2<\/sub> + Al<sub>2<\/sub>O<sub>3<\/sub> at or below 2%, with actual specifications agreed for the plant. Obtaining cheaper blast-furnace (BF) pellets without adjusting downstream flux and power costs can increase the total cost of steelmaking in a DRI project.<\/p>\n<h3>Can blast furnace pellets be used in a DRI shaft furnace?<\/h3>\n<p>Standard blast furnace pellets can be used in some DRI shaft furnaces, but typically contain less total iron and more acidic gangue (SiO<sub>2<\/sub> + Al<sub>2<\/sub>O<sub>3<\/sub>) than DR-grade pellets. In a blast furnace, that gangue melts into liquid slag before steelmaking; in a solid-state DRI shaft furnace, retained gangue increases the EAF slag volume, lime consumption and electrical power demand, with the actual penalty and clustering risk depending on ore chemistry and plant conditions.<\/p>\n<p>Beyond gangue chemistry, shaft furnaces require pellets that resist solid-state sintering (sticking or clustering) under compressive load. Under <a href=\"https:\/\/standards.iteh.ai\/catalog\/standards\/iso\/b86604d9-d32c-4066-bbda-0373ef4bb783\/iso-11256-2015?srsltid=AYCX9vLOX7OC-anqiJcZCbLcHQgpKYgWvaBabSf5TbEaHxkHO2hBVV3G\" target=\"_blank\" rel=\"nofollow noopener\">ISO 11256:2015 (Determination of the clustering index for shaft direct-reduction feedstocks)<\/a>, an approximately 2,000 g test portion is isothermally reduced at 850 \u00b0C under a fixed reducing gas mixture (45% H<sub>2<\/sub>, 30% CO, 15% CO<sub>2<\/sub>, 10% N<sub>2<\/sub>) with a 147 \u00b1 2 kPa static load applied after 60 minutes of reduction and then disaggregated in a tumbling drum. Coating selection and dosage should be validated for the ore and process so freshly reduced metallic iron surfaces resist sticking; ISO 11256 defines a test method rather than a universal commercial acceptance limit.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;min-width:640px;border-collapse:collapse;text-align:left;\">\n<caption style=\"text-align:left;font-weight:bold;\">DR-Grade vs. BF-Grade Iron Ore Pellet Specification Matrix (9 Parameters to Qualify)<\/caption>\n<thead style=\"background:#000018;color:#FFFFFF;\">\n<tr>\n<th style=\"padding:12px 14px;vertical-align:top;\">Specification Parameter<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">DR-Grade Pellet Target to Qualify<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">BF-Grade Pellet Substitution Check<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Consequence of Off-Spec Feed in DRI-EAF<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Total iron (Fe<sub>total<\/sub>)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Generally at least 67% Fe; confirm the contracted assay<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Generally 65% Fe or less; assess iron-unit yield<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Lower metallic yield per ton of charged DRI<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Acidic gangue (SiO<sub>2<\/sub> + Al<sub>2<\/sub>O<sub>3<\/sub>)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Acid gangue: maximum 3.5%; ideally maximum 2%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Measure silica and alumina separately<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Extra lime flux and EAF power demand depend on gangue composition<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Basic oxides (CaO + MgO)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">CaO and MgO: include each oxide in the slag balance<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Measure each oxide and include it in the slag balance<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Self-fluxing basicity reduces EAF lime additions<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Phosphorus (P)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Set the limit from steel grade and refining capability<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Set the limit from steel grade and refining capability<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Higher EAF oxidizing slag demand for dephosphorization<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Sulfur (S)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Set the limit from process and steelmaking requirements<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Set the limit from process and steelmaking requirements<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">H<sub>2<\/sub>S can poison reformer catalyst; assess sulfur release and gas treatment<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Pellet size fraction (9\u201316 mm)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">About 95% in the 9\u201316 mm band (Midrex)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Qualify the required pellet size band and permeability<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Wide size spread increases shaft pressure drop (&Delta;P)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Undersize fines (&lt;5.0 mm)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Agree a fines limit at the furnace screen<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Measure degradation through the handling route<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Gas channeling and dust carry-over into top-gas scrubber<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Cold Crushing Strength (CCS)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Agree the minimum cold crushing strength per pellet<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Test pellet cold crushing strength for the proposed blend<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Bed crushing under the shaft burden generates fines<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Clustering Index (ISO 11256 at 850 \u00b0C)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Agree a maximum after testing the selected coating<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Test clustering under the proposed H<sub>2<\/sub>\/CO conditions<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Cluster arches block burden descent and force shutdown<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2 id=\"inside-shaft-furnace\">Inside the Shaft Furnace: Reduction Zones, Gas Reforming, and Carburization<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_04.png\" class=\"wp-image-2922\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Cold-DRI shafts separate reduction, transition and cooling functions; CPFD example.\" \/><\/figure>\n<p>The cold-DRI shaft configuration described here operates as a three-zone counter-current chemical reactor where solid iron ore particles move downward while distinct gas circuits control reduction, transition, and cooling. As modeled in <a href=\"https:\/\/cpfd-software.com\/direct-reduced-iron-dri-shaft-furnace-for-steel-production\/\" target=\"_blank\" rel=\"nofollow noopener\">CPFD Barracuda gas-solid flow simulations of DRI shaft furnaces<\/a> and disclosed in <a href=\"https:\/\/patents.google.com\/patent\/WO2024170464A1\/en\" target=\"_blank\" rel=\"nofollow noopener\">WIPO Patent Application WO2024170464A1<\/a>, uniform radial gas distribution across the burden is critical to avoid cold channels through which low metallization product is discharged.<\/p>\n<ol>\n<li>Upper Reduction Zone : Hot reducing gas containing H<sub>2<\/sub> and CO enters through circumferential bustle ports and flows upward through the bed of descending pellets. <\/li>\n<li>Middle Transition Zone: Located between the bustle gas ports and the lower cooling loop, this buffer zone isolates the upper reducing atmosphere from the lower cooling circuit and allows methane (CH<sub>4<\/sub>) and carbon monoxide to diffuse into freshly reduced iron pores.<\/li>\n<li>Lower Cooling and Carburizing Zone (configured for cold or hot product discharge): In cold-DRI plants, cooling gas rich in natural gas (CH<sub>4<\/sub>) circulates through the conical bottom. Methane cracks endothermically on catalytic metallic iron surfaces (3Fe + CH<sub>4<\/sub> &rarr; Fe<sub>3<\/sub>C + 2H<sub>2<\/sub>), while CO disproportionates via the Boudouard reaction (2CO &rarr; C + CO<sub>2<\/sub>), altering the balance of cementite (Fe<sub>3<\/sub>C) and free carbon; this does not remove DRI handling and reoxidation hazards.<\/li>\n<\/ol>\n<p>According to a <a href=\"https:\/\/www.engineering.org.cn\/engi\/EN\/10.1016\/j.eng.2024.04.025\" target=\"_blank\" rel=\"nofollow noopener\">2024 Engineering journal review of direct reduced iron challenges<\/a>, the ratio of H<sub>2<\/sub> to CO in the bustle gas and the residence time in the transition\/cooling zones, determine what fraction of product carbon is chemically combined as cementite (Fe<sub>3<\/sub>C, with a process-dependent share of total carbon) versus free, sooty carbon on the surface of pellets.<\/p>\n<h2 id=\"metallization-and-carbon\">Metallization Degree and Carbon Content: How DRI Quality Controls EAF Performance<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_05.png\" class=\"wp-image-2923\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Metallization, carbon and scrap chemistry jointly set the EAF charge; IspatGuru and Midrex.\" \/><\/figure>\n<p>In electric arc furnaces, DRI quality is evaluated using two interrelated chemical parameters: the degree of metallization and total carbon content, including the share present as cementite. The degree of metallization characterizes the percentage of the total iron in sponge that&#8217;s converted to metallic iron.<\/p>\n<div style=\"padding:18px 20px;background:#f3f4f6;border-left:4px solid #000018;margin:20px 0;font-family:Consolas,monospace;font-size:16px;\"><strong>Metallization (%) = (Fe<sub>metallic<\/sub> &divide; Fe<sub>total<\/sub>) &times; 100<\/strong><\/div>\n<p>Residual iron oxide in DRI is commonly represented as w\u00fcstite (FeO) in a simplified melt-shop balance. As detailed in <a href=\"https:\/\/www.ispatguru.com\/use-of-direct-reduced-iron-in-electric-arc-furnace\/\" target=\"_blank\" rel=\"nofollow noopener\">IspatGuru&#8217;s metallurgical analysis of DRI in the electric arc furnace<\/a> and <a href=\"https:\/\/scholarsmine.mst.edu\/psmrc_facwork\/37\/\" target=\"_blank\" rel=\"nofollow noopener\">Missouri S&amp;T&#8217;s experimental study on the melting behavior of direct reduced iron in molten steel<\/a>, unreduced FeO must be reduced endothermically in the EAF bath by dissolved carbon (FeO + C &rarr; Fe + CO). A lower metallization degree increases the residual oxide burden; the electrical energy penalty depends on DRI charge share, carbon availability, iron recovery and furnace operation.<\/p>\n<h3>Why is direct reduced iron blended with scrap in an electric arc furnace?<\/h3>\n<p>Direct reduced iron is blended with scrap in an electric arc furnace to dilute residual elements such as copper and tin that are difficult to remove during conventional steelmaking. The required DRI share follows from the scrap assay and target steel chemistry, enabling low-residual flat-rolled, automotive and deep-drawing steel grades.<\/p>\n<h3>What is the ideal carbon content in direct reduced iron for EAF steelmaking?<\/h3>\n<p>For electric arc furnaces charging DRI alongside scrap, the ideal combined carbon content (present primarily as cementite, Fe 3 C) depends on residual FeO, oxygen practice and the desired steel grade. Carbon reduces residual FeO and can react with injected oxygen to produce carbon monoxide bubbles for foamy slag arc shielding, while the useful chemical heat and any decarburization penalty depend on furnace operation.<\/p>\n<p>The interaction of metallization, carbon and charge mix is examined in <a href=\"https:\/\/www.mdpi.com\/1996-1073\/19\/15\/3620\" target=\"_blank\" rel=\"nofollow noopener\">MDPI Energies\u2019 study on scrap and DRI ratios in EAF energy balances<\/a>, but it does not establish a universal rule that pushing metallization above a fixed value worsens melt-shop efficiency. Without sufficient available carbon to react with FeO inside the melting pellet, CO evolution and foamy slag can weaken; weaker arc shielding can increase radiation toward water-cooled panels and refractory walls, while heat losses and the need to inject powdered carbon depend on actual bath conditions and recovery of internal cementite or injected carbon.<\/p>\n<h2 id=\"worked-example-charge-balance\">Worked Example: DRI-to-EAF Charge Balance and Slag Calculation<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_06.png\" class=\"wp-image-2924\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Illustrative 100 t charge: slag 4,510 vs 9,021 kg; explicit mass-balance assumptions, not plant guarantees.\" \/><\/figure>\n<p>To assess the same parameters for two competing pellet or DRI supply offers, process engineers and raw material buyers at a steel plant can apply the following <strong>DRI-to-EAF Charge Balance Worksheet<\/strong>. The calculation compares two hypothetical 100-tonne metallic charges (70 t cold DRI + 30 t shredded steel scrap), with liquid steel output determined by iron recovery rather than assumed equal to the input charge, at a target slag basicity (B<sub>2<\/sub> = CaO \/ SiO<sub>2<\/sub> ) of 2.0.<\/p>\n<div style=\"padding:20px;border:1px solid #d9dce2;margin:24px 0;\"><strong>Explicit boundary and assumptions for the DRI-to-EAF Charge Balance Worksheet<\/strong><\/p>\n<p>All inputs below are transparent engineering calculation assumptions, not private plant records or guaranteed vendor performance. Both cases charge 70.0 t of cold DRI (at 40 \u00b0C) and 30.0 t of low-residual shredded scrap on a 100 t charge basis, with DRI assumed to contain only iron, residual FeO, carbon and silica. Scrap consists of 29,550 kg of iron and 450 kg of inert oxides in each case; those oxides contribute no CaO or SiO<sub>2<\/sub>. Burnt lime contains 90% effective CaO and 10% inert material, all of which enters the slag. This idealized calculation assumes complete iron recovery, complete FeO reduction, no dust or iron loss, no carbon remaining in the tap, and perfect utilization of carbon to form CO; it does not predict electrical power consumption or provide an operating recipe.<\/p>\n<p>For this assumed composition, the total-iron mass fraction is (1 \u2212 carbon fraction \u2212 silica fraction) \/ [1 + (1 \u2212 metallization) \u00d7 15.999 \/ 55.845], with metallization expressed as a fraction; residual FeO mass follows from the unreduced iron fraction. The resulting theoretical pure-iron taps are 95.752 t in Case A and 94.378 t in Case B, and the slag figures include the lime impurities and scrap oxides; Case A additionally requires 727 kg of theoretical oxygen to convert surplus carbon to CO, while Case B requires no supplementary oxygen within this simplified balance. Neither these ideal yields nor the theoretical carbon additions are plant performance guarantees; actual iron losses, carbon efficiency, tap chemistry and residual FeO must be measured before comparing supply offers.<\/p>\n<\/div>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;min-width:640px;border-collapse:collapse;text-align:left;\">\n<caption style=\"text-align:left;font-weight:bold;\">DRI-to-EAF Charge Balance Worksheet (100 t Metallic Charge Basis: 70 t DRI + 30 t Scrap)<\/caption>\n<thead style=\"background:#000018;color:#FFFFFF;\">\n<tr>\n<th style=\"padding:12px 14px;vertical-align:top;\">Charge \/ Melt-Shop Parameter<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Unit<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Case A: Assumed DR-Grade DRI<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Case B: Assumed High-Gangue DRI<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Delta (Case B vs. Case A)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Charged cold DRI mass<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">t \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">70.0<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">70.0<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">0.0 t<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">DRI metallization degree<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">94.0%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">91.0%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">&minus;3.0 percentage points metallization<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">DRI carbon content<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">wt%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">2.0%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">1.2%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">&minus;0.8 percentage points C (&minus;560 kg C\/heat)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">DRI acidic gangue (assumed entirely SiO<sub>2<\/sub>)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">wt%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">1.8%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">3.8%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+2.0 percentage points acidic gangue<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Acidic gangue mass entering EAF from DRI<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">kg \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">1,260<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">2,660<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+1,400 kg gangue<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Unreduced FeO entering EAF from DRI<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">kg \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">5,110<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">7,506<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+2,396 kg FeO to reduce<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Required CaO flux at B<sub>2<\/sub> = 2.0<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">kg \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">2,520<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">5,320<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+2,800 kg CaO<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Burnt lime addition (at 90% CaO purity)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">kg \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">2,800<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">5,911<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+3,111 kg burnt lime<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">DRI-derived EAF slag mass (incl. silica + lime + scrap oxides)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">kg \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">4,510<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">9,021<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+4,511 kg extra slag per heat<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Theoretical external carbon required for FeO reduction<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">kg \/ heat<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">0<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">415<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">+415 kg theoretical carbon<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>Net EAF electrical energy consumption<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>kWh \/ t liquid steel<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>Not predicted<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>Not predicted<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>Not predicted<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Consider the inputs that affect operating costs in Case B: even if the high-gangue DRI is offered at a discount per metric ton, melting an extra 4,511 kg of slag and reducing an extra 2,396 kg of FeO per 100 t charge calls for 3,111 kg of additional burnt lime and 415 kg of extra injection carbon under these idealized assumptions, while electrical energy consumption and tap-to-tap time require a separate furnace heat balance.<\/p>\n<h2 id=\"handling-hbi-shipping\">Hot DRI, Cold DRI, and Hot Briquetted Iron (HBI): Handling, Passivation, and Shipping<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_07.png\" class=\"wp-image-2925\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"DRI forms have distinct IMSBC schedules; selected 07-23 comparison and updated 08-25 DRI A.\" \/><\/figure>\n<p>Safe production and handling of sponge iron after it leaves the shaft furnace determines both its EAF thermal credit and its maritime transport classification. When a direct reduction plant is situated next to the melt shop, uncooled DRI can be discharged at temperatures of 600 to 700 \u00b0C and transported to the electric furnaces used for steel production via MIDREX HOTLINK or nitrogen pneumatic transport, enhancing the overall efficiency of the process.<\/p>\n<p>Charging hot DRI carries sensible heat into the EAF, reducing the energy needed to melt the charge; in <a href=\"https:\/\/www.midrex.com\/direct-from-midrex\/technical-articles\/getting-the-most-from-direct-reduced-iron-operational-results-of-midrex-hot-transport-hot-charging\/\" target=\"_blank\" rel=\"nofollow noopener\">Midrex\u2019s reported hot-transport-vessel example<\/a>, heats receiving one 90-tonne hot DRI vessel saved an average 60 kWh\/t of liquid steel; the article equates this to 120 kWh\/t at a 100% hot DRI charge, with results specific to that operating example. When the iron must be stored outdoors or shipped by sea as merchant metallics, however, porous sponge iron presents a severe exothermic reoxidation hazard. As explained in the <a href=\"https:\/\/www.metallics.org\/about-metallics\/hbi\/\" target=\"_blank\" rel=\"nofollow noopener\">IIMA Hot Briquetted Iron (HBI) technical guide<\/a> and <a href=\"https:\/\/www.sme-group.com\/blog\/passivation-of-direct-reduction-iron\" target=\"_blank\" rel=\"nofollow noopener\">SME&#8217;s review of DRI passivation techniques<\/a>, compacting hot DRI between the rolls of a briquetting press at temperatures above 650 \u00b0C produces pillow-shaped hot-briquetted iron briquettes with an apparent density &gt;5.0 g\/cm<sup>3<\/sup>, reducing internal pore volume and reactivity with moisture.<\/p>\n<p>In accordance with the International Maritime Organization&#8217;s IMSBC Code &#8211; including Amendment 07-23 that entered into force on January 1, 2025, and is outlined in the <a href=\"https:\/\/www.igpandi.org\/article\/carriage-of-direct-reduced-iron-dri\/\" target=\"_blank\" rel=\"nofollow noopener\">International Group of P&amp;I Clubs DRI carriage circular<\/a> &#8211; maritime shipments are grouped into four separate schedules:<\/p>\n<p>The table summarizes selected distinctions, not a complete cargo acceptance or ventilation procedure; the DRI (A) row shows the revised <a href=\"https:\/\/wwwcdn.imo.org\/localresources\/en\/KnowledgeCentre\/IndexofIMOResolutions\/MSCResolutions\/MSC.575(110).pdf\" target=\"_blank\" rel=\"nofollow noopener\">Amendment 08-25 requirements<\/a>, while the other rows summarize 07-23. The updated DRI (A) schedule allows voluntary adoption from January 2026 and enters into force in January 2027, so shippers must confirm the applicable edition and full cargo-specific requirements before booking a voyage.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;min-width:640px;border-collapse:collapse;text-align:left;\">\n<caption style=\"text-align:left;font-weight:bold;\">IMO IMSBC Code Schedules for Direct Reduced Iron (07-23 and Updated 08-25 DRI A)<\/caption>\n<thead style=\"background:#000018;color:#FFFFFF;\">\n<tr>\n<th style=\"padding:12px 14px;vertical-align:top;\">IMSBC Schedule<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Form of DRI Covered<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Density \/ Particle Size<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Moisture &amp; Hold Atmosphere Rules<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>DRI (A)<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Hot-molded briquettes (HBI); 08-25: total Fe &ge;88%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Apparent density &gt;5.0 g\/cm<sup>3<\/sup>; fines (&lt;6.35 mm) &le;5%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">08-25: moisture &le;1.0%, temperature &le;65 \u00b0C; surface ventilation + H<sub>2<\/sub> monitoring<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>DRI (B)<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Lumps, pellets, and cold-molded briquettes<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Lumps\/pellets: average 6.35\u201325 mm; fines &lt;6.35 mm &le;5%<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Pre-loading moisture certificate &lt;0.3%; cargo temperature &le;65 \u00b0C; dry inert gas (nitrogen preferred) (O<sub>2<\/sub> &lt;5%)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>DRI (C)<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Dry by-product fines and screenings<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Average particle size &lt;6.35 mm; no particles &gt;12 mm<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Moisture &le;0.3%; cargo temperature &le;65 \u00b0C; dry inert gas (nitrogen preferred) as per DRI (B)<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\"><strong>DRI (D)<\/strong><\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Aged wet by-product fines (new 2025 schedule)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Average particle size &lt;6.35 mm; aged outdoors &ge;30 days<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Moisture &ge;2.0% and &lt;TML; pre-loading temperature &le;65 \u00b0C and H<sub>2<\/sub> evolution check<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2 id=\"process-gas-loop-maintenance\">Process Gas Loop Bottlenecks: Reformer, Cooler, and Heat Exchanger Maintenance<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_08.png\" class=\"wp-image-2926\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Process gas loop maintenance poster linking top-gas quench coolers, stripper reboilers and metal-dusting transfer coolers.\" \/><\/figure>\n<p>While metallurgical evaluations are focused on the reduction shaft, day-to-day plant availability in a gas-based DRI unit also depends on the closed-loop gas conditioning and heat-recovery train. A process-dependent share of the spent top gas leaving the shaft furnace is scrubbed, cooled, compressed, treated for CO<sub>2<\/sub> removal where the flowsheet requires it, and reheated before returning to the bustle ports.<\/p>\n<p>As documented in <a href=\"https:\/\/heat-exchanger-world.com\/heat-exchanger-fouling-in-practice-understand-mitigate-1\/\" target=\"_blank\" rel=\"nofollow noopener\">Heat Exchanger World&#8217;s engineering analysis of industrial fouling<\/a>, <a href=\"https:\/\/heat-exchanger-world.com\/fouling-a-major-challenge-for-heat-exchangers-in-chemical-process-industries\/\" target=\"_blank\" rel=\"nofollow noopener\">Heat Exchanger World&#8217;s review of thermal resistance and pressure drop penalties<\/a>, and <a href=\"https:\/\/www.chemengonline.com\/waste-heat-recovery-methods-and-technologies\/?printmode=1\" target=\"_blank\" rel=\"nofollow noopener\">Chemical Engineering&#8217;s guide to waste-heat recovery exchangers<\/a>, gas-loop exchangers can experience fouling, corrosion and thermal damage, depending on the service. In addition, <a href=\"https:\/\/www.metaltek.com\/market-solutions\/petrochemical\/direct-reduction-iron\/\" target=\"_blank\" rel=\"nofollow noopener\">MetalTek&#8217;s metallurgical guide for DRI reformer tubes<\/a> highlights that reformer components require resistance to creep, thermal fatigue, oxidation and carburization for the specified operating conditions. Practitioners on <a href=\"https:\/\/www.eng-tips.com\/threads\/tank-fluid-heating-with-recirculation-and-heat-exchanger.517615\/\" target=\"_blank\" rel=\"nofollow noopener\">Eng-Tips heat exchanger recirculation threads<\/a> similarly emphasize sizing recirculation exchangers with adequate fouling allowance and cleanout access.<\/p>\n<p>The <strong>gas-loop maintenance map<\/strong> below classifies the exchangers in the process gas loop by potential deposit chemistry and inspection needs; it is a screening aid across alternative flowsheets: a plant does not necessarily contain all nine services, so set alarm limits and cleaning procedures from equipment design, solvent chemistry and the clean-operation baseline. For more information on shell-and-tube mechanical design, please refer to our <a href=\"https:\/\/boshiya.com\/blog\/heat-exchanger-fouling-guide\/\" target=\"_blank\">heat exchanger fouling guide<\/a> and <a href=\"https:\/\/boshiya.com\/blog\/tube-sheet-heat-exchanger-guide\/\" target=\"_blank\">tube-sheet heat exchanger engineering guide<\/a>.<\/p>\n<div style=\"overflow-x:auto;margin:24px 0;\">\n<table style=\"width:100%;min-width:640px;border-collapse:collapse;text-align:left;\">\n<caption style=\"text-align:left;font-weight:bold;\">3-Zone Gas Loop Fouling Map for Gas-Based DRI Plants (9 Exchanger &amp; Cooler Services)<\/caption>\n<thead style=\"background:#000018;color:#FFFFFF;\">\n<tr>\n<th style=\"padding:12px 14px;vertical-align:top;\">Gas Loop Zone &amp; Equipment<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Process Stream &amp; Temperature Window<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Potential Fouling \/ Degradation Mode<\/th>\n<th style=\"padding:12px 14px;vertical-align:top;\">Inspection Trigger &amp; Maintenance Review<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">1. Top-Gas Wet Scrubber Quench Cooler<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Spent top gas + recirculated water<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Entrained oxide dust; water-side scale where chemistry permits<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">&Delta;P rise or outlet gas temperature rise; investigate fouling before cleaning the tube bundle<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">2. Process Gas Compressor Aftercooler<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Compressed recycle gas<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Oxide sludge; biological deposits or mineral scale on the water side<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Compressor discharge temp creep; removable bundle hydroblasting<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">3. Cooling-Zone Gas Scrubber Cooler<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Lower-shaft cooling gas<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Carbon deposits or iron-bearing dust, depending on cooling-gas chemistry<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Cold DRI discharge temperature above the design limit; investigate before high-pressure lance cleaning<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">4. CO<sub>2<\/sub> Absorber Lean\/Rich Exchanger<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">MDEA \/ activated amine or potassium carbonate<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Solvent degradation deposits, corrosion products or particulate blockage<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Approach temperature widening; identify deposits before chemical circulation or mechanical flushing<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">5. CO<sub>2<\/sub> Stripper Reboiler Bundle<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Rich solvent + low-pressure steam \/ process gas<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Solvent degradation or localized corrosion; inspect chemistry and hot surfaces<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Rising CO<sub>2<\/sub> slip in sweet gas; inspect solvent and reboiler duty before bundle pull<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">6. Overhead CO<sub>2<\/sub> Reflux Condenser<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Wet CO<sub>2<\/sub> stripper overhead vapor<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Wet CO<sub>2<\/sub> corrosion; select materials from condensate chemistry and design conditions<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Condensate iron count spike; tube plugging or retubing<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">7. Feed Gas Preheater (Convection Bank)<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Mixed process gas + flue gas<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Flue-side deposits or process-side carbon deposition; distinguish the affected side<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Flue draft loss + preheat shortfall; external sootblowing \/ cleaning<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">8. Reformer \/ Heater Transfer Line Cooler<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Reformed H<sub>2<\/sub>\/CO gas; assess temperature and gas chemistry<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Carburization or metal dusting under susceptible temperature and gas-composition conditions<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Review gas chemistry, metal temperature and alloy suitability<\/td>\n<\/tr>\n<tr>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">9. Reformer Radiant Catalyst Tubes<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">CH<sub>4<\/sub> + CO<sub>2<\/sub> + H<sub>2<\/sub>O over Ni catalyst<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Tube creep and carburization; nickel catalyst sulfur poisoning assessed separately<\/td>\n<td style=\"padding:12px 14px;border-bottom:1px solid #d9dce2;vertical-align:top;\">Optical pyrometer tube-wall checks + diameter creep strain audit<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<div class=\"ecc-rfq-checklist\" style=\"padding:20px;border:1px solid #d9dce2;margin:24px 0;\"><strong>RFQ &amp; Turnaround Checklist for DRI Process Gas Coolers and Heat Exchanger Bundles<\/strong><\/p>\n<ul>\n<li><strong>Process gas composition &amp; dew point:<\/strong> Specify H<sub>2<\/sub>, CO, CO<sub>2<\/sub>, H<sub>2<\/sub>O, CH<sub>4<\/sub>, and trace H<sub>2<\/sub>S (ppmv) across normal and startup conditions.<\/li>\n<li><strong>Particulate loading:<\/strong> State expected iron oxide and carbon dust carry-over (mg\/Nm<sup>3<\/sup>) and the proposed tube-side velocity range, balancing settling, erosion and pressure drop.<\/li>\n<li><strong>Metallurgy &amp; corrosion allowance:<\/strong> Assess carbon steel, 316L \/ duplex 2205 and high-Cr\/Ni alloys for the actual wet CO<sub>2<\/sub> chemistry, metal temperature and corrosion exposure; confirm material suitability through a project-specific corrosion assessment.<\/li>\n<li><strong>Bundle extraction envelope:<\/strong> Specify TEMA type (e.g., AEL, BEM, or pull-through floating head) and turnaround <a href=\"https:\/\/boshiya.com\/bundle-cleaning\/\" target=\"_blank\">heat exchanger bundle cleaning<\/a> clearance for hydroblasting lances.<\/li>\n<\/ul>\n<\/div>\n<h2 id=\"hydrogen-dri-smelting\">Hydrogen-Based DRI (H2-DRI) and Smelting Reduction: What Changes for Plant Equipment?<\/h2>\n<figure style=\"margin:28px 0; text-align:center;\"><img decoding=\"async\" src=\"https:\/\/boshiya.com\/wp-content\/uploads\/2026\/11\/direct-reduced-iron-h2_09.png\" class=\"wp-image-2927\" width=\"1200\" height=\"800\" loading=\"lazy\" style=\"max-width:100%; height:auto; border-radius:8px;\" alt=\"Hydrogen DRI changes heat and carbon balances; some projects add ESF before BOF, per Midrex and cited review.\" \/><\/figure>\n<p>Replacing natural gas or coal with green or low-carbon hydrogen in the hydrogen-based direct reduction of iron fundamentally changes the thermodynamic balance and metallurgy of the shaft, as compared to a conventional blast furnace. In a natural gas furnace, endothermic H<sub>2<\/sub> reduction (Fe<sub>2<\/sub>O<sub>3<\/sub> + 3H<sub>2<\/sub> &rarr; 2Fe + 3H<sub>2<\/sub>O) is partially offset by exothermic CO reduction (Fe<sub>2<\/sub>O<sub>3<\/sub> + 3CO &rarr; 2Fe + 3CO<sub>2<\/sub>) and cementite formation.<\/p>\n<p>When a hydrogen-based direct reduction plant transitions toward a hydrogen-rich reducing gas stream, three engineering changes occur simultaneously:<\/p>\n<ul>\n<li>Revised process-gas heat balance: Because pure hydrogen reduction of iron oxides to metallic iron is endothermic overall, the reducing gas heater or electric gas heater requires thermal duty and gas flow rates sized for the selected gas utilization to maintain the specified bed temperature and reduction rate.<\/li>\n<li>Carbon pickup depends on the gas supply: pure H<sub>2<\/sub> contributes no carbon to sponge iron in the reduction zone. As discussed in <a href=\"https:\/\/www.midrex.com\/direct-from-midrex\/technical-articles\/impact-of-hydrogen-dri-on-eaf-steelmaking\/\" target=\"_blank\" rel=\"nofollow noopener\">Midrex\u2019s hydrogen DRI and EAF analysis<\/a>, hydrocarbon cooling gas or controlled bio-methane\/natural-gas trim injection in the lower zone can change product carbon, with carbon additions selected from the downstream EAF balance for foamy slag operation rather than a universal requirement to discharge hot or inject methane.<\/li>\n<li>Two-step DRI + Electric Smelting Furnace (ESF) pathway for BF-grade pellets: Because global DR-grade pellet supply is constrained, some projects are developing an intermediate submerged-arc electric smelting furnace (ESF \/ melter) between the H<sub>2<\/sub>-DRI shaft and a basic oxygen converter (DRI-ESF-BOF). The ESF melts high-gangue BF-grade H<sub>2<\/sub>-DRI, separates gangue into liquid slag, and taps carburized hot metal into existing BOF shops.<\/li>\n<\/ul>\n<h2 id=\"faqs\">Direct Reduced Iron (DRI) Frequently Asked Questions<\/h2>\n<div class=\"faq-item\">\n<h3>What is the difference between direct reduced iron (DRI) and hot briquetted iron (HBI)?<\/h3>\n<p>Direct reduced iron (DRI) is porous sponge iron in pellet or lump form with an apparent density of 3.4\u20133.6 g\/cm<sup>3<\/sup> and high internal surface area. Hot briquetted iron (HBI), classified as DRI (A) under the IMO IMSBC Code for maritime bulk shipping, is DRI compacted at temperatures above 650 \u00b0C into dense pillow-shaped briquettes with an apparent density greater than 5.0 g\/cm<sup>3<\/sup>, reducing porosity and susceptibility to moisture absorption, self-heating, and reoxidation.<\/p>\n<\/div>\n<div class=\"faq-item\">\n<h3>Why is direct reduced iron called sponge iron?<\/h3>\n<p>As oxygen leaves in the form of H<sub>2<\/sub>O and CO<sub>2<\/sub> gas, each particle retains its external shape while developing a microscopic network of interconnected voids that resembles a porous sponge under a microscope.  The name describes this porous structure; it does not identify a separate production route or a guaranteed chemical specification.<\/p>\n<\/div>\n<div class=\"faq-item\">\n<h3>How much electrical energy does hot DRI charging save in an electric arc furnace?<\/h3>\n<p>Charging hot DRI directly from the shaft furnace into an electric arc furnace reduces electricity use compared with charging cold DRI, but the saving depends on charge share, temperature and operation when producing new steel. Midrex reports an average 60 kWh per metric ton of liquid steel saved with one 90-tonne hot DRI vessel per heat, equivalent in its comparison to 120 kWh\/t at a 100% hot DRI charge.<\/p>\n<\/div>\n<div class=\"faq-item\">\n<h3>Does direct reduced iron contain carbon when produced with pure hydrogen?<\/h3>\n<p>DRI reduced solely with pure hydrogen receives no carbon from the reducing gas; natural gas, biomethane, or CO can be injected into the transition or cooling zone to form cementite (Fe<sub>3<\/sub>C) before EAF melting.<\/p>\n<\/div>\n<div class=\"faq-item\">\n<h3>What is the clustering index test for direct reduction iron ore pellets?<\/h3>\n<p>ISO 11256 measures pellet sticking by isothermally reducing an approximately 2,000 g sample at 850 \u00b0C with a 147 \u00b1 2 kPa static load applied after 60 minutes of reduction in H<sub>2<\/sub>\/CO\/CO<sub>2<\/sub>\/N<sub>2<\/sub> gas and tumbling the clustered mass.<\/p>\n<\/div>\n<div style=\"margin:36px 0;padding:24px;background:#000018;color:#FFFFFF;\">\n<h3 style=\"color:#FFFFFF;margin-top:0;\">Specify Custom Process Gas Coolers and Heat Exchangers for Your DRI or Steel Plant<\/h3>\n<p>BOSHIYA fabricates custom ASME and TEMA shell-and-tube heat exchangers, top-gas quench coolers, CO<sub>2<\/sub> stripper reboilers, and pressure vessels engineered for fouling-intensive metallurgical and chemical gas loops. Explore our <a href=\"https:\/\/boshiya.com\/steel-and-metal-plants\/\" style=\"color:#FFFFFF;text-decoration:underline;\" target=\"_blank\">steel and metal plant equipment portfolio<\/a> or <a href=\"https:\/\/boshiya.com\/contact-us\/\" style=\"color:#FFFFFF;text-decoration:underline;\" target=\"_blank\">contact our engineering team with your process datasheet<\/a> for a project-specific thermal and mechanical review.<\/p>\n<\/div>\n<div style=\"margin:40px 0 24px;padding:24px;background:#f3f4f6;border-top:3px solid #000018;\">\n<h3>References &amp; Sources<\/h3>\n<ol>\n<li><a href=\"https:\/\/www.ecfr.gov\/current\/title-40\/chapter-I\/subchapter-C\/part-98\/subpart-Q\" target=\"_blank\" rel=\"nofollow noopener\">40 CFR Part 98 Subpart Q, Iron and Steel Production<\/a> U.S. Environmental Protection Agency (eCFR).<\/li>\n<li><a href=\"https:\/\/www.ecfr.gov\/current\/title-40\/chapter-I\/subchapter-C\/part-98\/subpart-Q\/section-98.173\" target=\"_blank\" rel=\"nofollow noopener\">40 CFR 98.173, Calculating GHG emissions for direct reduced iron furnaces and EAFs<\/a> U.S. Environmental Protection Agency (eCFR).<\/li>\n<li><a href=\"https:\/\/www.osti.gov\/biblio\/129117-latest-development-corex-production-maintenance-performance\" target=\"_blank\" rel=\"nofollow noopener\">COREX reduction-shaft and melter-gasifier production and maintenance record (distinct from conventional DRI-only routes)<\/a> U.S. Department of Energy OSTI.<\/li>\n<li><a href=\"https:\/\/scholarsmine.mst.edu\/psmrc_facwork\/37\/\" target=\"_blank\" rel=\"nofollow noopener\">The Melting Behavior of Hydrogen Direct Reduced Iron in Molten Steel<\/a> Missouri University of Science and Technology, Peacemaker Steelmaking Research Center.<\/li>\n<li><a href=\"https:\/\/www.metallics.org\/about-metallics\/dri\/\" target=\"_blank\" rel=\"nofollow noopener\">Direct Reduced Iron (DRI): Technical Specification and Properties<\/a> International Iron Metallics Association (IIMA).<\/li>\n<li><a href=\"https:\/\/www.metallics.org\/about-metallics\/hbi\/\" target=\"_blank\" rel=\"nofollow noopener\">Hot Briquetted Iron (HBI): Compaction Density and Shipping Guide<\/a> International Iron Metallics Association (IIMA).<\/li>\n<li><a href=\"https:\/\/www.metallics.org\/about-metallics\/dri-production\/\" target=\"_blank\" rel=\"nofollow noopener\">DRI Production Routes: Shaft Furnaces vs. Rotary Kilns<\/a> International Iron Metallics Association (IIMA).<\/li>\n<li><a href=\"https:\/\/www.midrex.com\/world-dri-statistics\/world-dri-production-reaches-151-0-mt-in-2025\/\" target=\"_blank\" rel=\"nofollow noopener\">2025 World Direct Reduction Statistics: Global DRI Production Reaches 151.0 Mt<\/a> Midrex Technologies, Inc.; 2025 production data, published September 2026.<\/li>\n<li><a href=\"https:\/\/standards.iteh.ai\/catalog\/standards\/iso\/b86604d9-d32c-4066-bbda-0373ef4bb783\/iso-11256-2015?srsltid=AYCX9vLOX7OC-anqiJcZCbLcHQgpKYgWvaBabSf5TbEaHxkHO2hBVV3G\" target=\"_blank\" rel=\"nofollow noopener\">ISO 11256:2015, Iron ore pellets for shaft direct-reduction feedstocks, Determination of the clustering index<\/a> International Organization for Standardization.<\/li>\n<li><a href=\"https:\/\/www.igpandi.org\/article\/carriage-of-direct-reduced-iron-dri\/\" target=\"_blank\" rel=\"nofollow noopener\">Carriage of Direct Reduced Iron (DRI) under IMSBC Code Amendment 07-23<\/a> International Group of P&amp;I Clubs, 2025.<\/li>\n<li><a href=\"https:\/\/www.mdpi.com\/1996-1073\/19\/15\/3620\" target=\"_blank\" rel=\"nofollow noopener\">Impact of Scrap and Hydrogen-Based Direct Reduced Iron Ratios on Energy Demand, Emissions, and Oxygen Management in Green Steelmaking<\/a> MDPI Energies, 2026.<\/li>\n<li><a href=\"https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0959652625000319\" target=\"_blank\" rel=\"nofollow noopener\">Technical analysis of high-efficiency and flexible direct reduced iron systems<\/a> Journal of Cleaner Production, 2025.<\/li>\n<li><a href=\"https:\/\/www.engineering.org.cn\/engi\/EN\/10.1016\/j.eng.2024.04.025\" target=\"_blank\" rel=\"nofollow noopener\">Development of Direct Reduced Iron: Challenges and Pathways<\/a> Engineering, Chinese Academy of Engineering, 2024.<\/li>\n<li><a href=\"https:\/\/www.ispatguru.com\/use-of-direct-reduced-iron-in-electric-arc-furnace\/\" target=\"_blank\" rel=\"nofollow noopener\">Use of Direct Reduced Iron in Electric Arc Furnace Steelmaking<\/a> IspatGuru Metallurgical Reference.<\/li>\n<li><a href=\"https:\/\/heat-exchanger-world.com\/heat-exchanger-fouling-in-practice-understand-mitigate-1\/\" target=\"_blank\" rel=\"nofollow noopener\">Heat Exchanger Fouling in Practice: Understand &amp; Mitigate<\/a> Heat Exchanger World.<\/li>\n<li><a href=\"https:\/\/www.chemengonline.com\/waste-heat-recovery-methods-and-technologies\/?printmode=1\" target=\"_blank\" rel=\"nofollow noopener\">Waste Heat Recovery Methods and Technologies in Process Gas Loops<\/a> Chemical Engineering.<\/li>\n<li><a href=\"https:\/\/patents.google.com\/patent\/WO2024170464A1\/en\" target=\"_blank\" rel=\"nofollow noopener\">WO2024170464A1, Method of producing direct reduced iron in a shaft furnace<\/a> Google Patents, 2024.<\/li>\n<li><a href=\"https:\/\/patents.google.com\/patent\/JP2025539600A\/en\" target=\"_blank\" rel=\"nofollow noopener\">JP2025539600A, Process for producing direct reduced iron with cooling gas control<\/a> Google Patents, 2025.<\/li>\n<\/ol>\n<\/div>\n<div style=\"margin:32px 0;\">\n<h3>Related Steel &amp; Heat Transfer Engineering Guides<\/h3>\n<ul>\n<li><a href=\"https:\/\/boshiya.com\/blog\/reduced-iron-process-explained\/\" target=\"_blank\">Reduced iron process explained: solid-state reduction reactions<\/a><\/li>\n<li><a href=\"https:\/\/boshiya.com\/blog\/mini-mill-vs-integrated\/\" target=\"_blank\">Mini-mill vs. integrated steel mill: process and equipment comparison<\/a><\/li>\n<li><a href=\"https:\/\/boshiya.com\/blog\/heat-exchanger-fouling-guide\/\" target=\"_blank\">Heat exchanger fouling guide: mechanisms, thermal resistance, and mitigation<\/a><\/li>\n<li><a href=\"https:\/\/boshiya.com\/blog\/tube-sheet-heat-exchanger-guide\/\" target=\"_blank\">Tube-sheet heat exchanger design and maintenance guide<\/a><\/li>\n<\/ul>\n<\/div>\n<\/div>\n<style>\r\n.lwrp.link-whisper-related-posts{\r\n            \r\n            margin-top: 40px;\nmargin-bottom: 30px;\r\n        }\r\n        .lwrp .lwrp-title{\r\n            \r\n            \r\n        }.lwrp .lwrp-description{\r\n            \r\n            \r\n\r\n        }\r\n        .lwrp .lwrp-list-container{\r\n        }\r\n        .lwrp .lwrp-list-multi-container{\r\n            display: flex;\r\n        }\r\n        .lwrp .lwrp-list-double{\r\n            width: 48%;\r\n        }\r\n        .lwrp .lwrp-list-triple{\r\n            width: 32%;\r\n        }\r\n        .lwrp .lwrp-list-row-container{\r\n            display: flex;\r\n            justify-content: space-between;\r\n        }\r\n        .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n            width: calc(25% - 20px);\r\n        }\r\n        .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-list-item img{\r\n            max-width: 100%;\r\n            height: auto;\r\n            object-fit: cover;\r\n            aspect-ratio: 1 \/ 1;\r\n        }\r\n        .lwrp .lwrp-list-item.lwrp-empty-list-item{\r\n            background: initial !important;\r\n        }\r\n        .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n        .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n            \r\n            \r\n            \r\n            \r\n        }@media screen and (max-width: 480px) {\r\n            .lwrp.link-whisper-related-posts{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-title{\r\n                \r\n                \r\n            }.lwrp .lwrp-description{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-multi-container{\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-multi-container ul.lwrp-list{\r\n                margin-top: 0px;\r\n                margin-bottom: 0px;\r\n                padding-top: 0px;\r\n                padding-bottom: 0px;\r\n            }\r\n            .lwrp .lwrp-list-double,\r\n            .lwrp .lwrp-list-triple{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-row-container{\r\n                justify-content: initial;\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n            .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n                \r\n                \r\n                \r\n                \r\n            };\r\n        }<\/style>\r\n<div id=\"link-whisper-related-posts-widget\" class=\"link-whisper-related-posts lwrp\">\r\n            <div class=\"lwrp-title\">Related Posts<\/div>    \r\n        <div class=\"lwrp-list-container\">\r\n                                            <div class=\"lwrp-list-multi-container\">\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-left\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/heat-exchanger-approach-temperature\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Heat Exchanger Approach Temperature: Definition, Calculation and Performance<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/chemical-plant-bundle-puller\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Chemical Plant Bundle Puller: Essential Equipment for the Petrochemical Industry<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/refinery-turnaround-cleaning\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Refinery Turnaround Cleaning: Chemical Methods &amp; Planning Guide<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/bundle-extractor-operator-training\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Bundle Extractor Operator Training: A Comprehensive Guide to Tube Bundle Extraction and Maintenance<\/span><\/a><\/li>                    <\/ul>\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-right\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/bundle-extractor-manufacturer\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Top 15 Bundle Extractor Manufacturers You Need to Know in 2026\uff08Updated List\uff09<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/shell-side-tube-side-cleaning\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Shell Side &amp; Tube Side Cleaning: Methods, Equipment &amp; Best Practices<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/cat-cracker-operation-refinery\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">What Is a Cat Cracker? FCC Unit Operation &#038; Refinery Guide<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/boshiya.com\/blog\/methanol-production\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Methanol Production Guide: Process, Routes, and Buyer Checks<\/span><\/a><\/li>                    <\/ul>\r\n                <\/div>\r\n                        <\/div>\r\n<\/div>","protected":false},"excerpt":{"rendered":"<p>Direct reduced iron (DRI) is produced by converting iron ore to metallic iron through solid-state reduction below iron\u2019s 1,538 \u00b0C melting point. Mills assessing demand for direct reduced iron need to qualify lower-residual feedstock for the electric furnaces used to melt automotive and flat rolled steels. For engineers assessing a DRI purchase or production process across iron and steelmaking, the practical starting points are feedstock qualification, the DRI-to-EAF charge balance, and process-gas equipment requirements; the cost of the steel being produced depends on gangue chemistry, carbon, discharge temperature and heat-exchanger reliability. Engineering parameters at a glance Process window: Solid-state reduction of iron oxides to metallic iron at temperatures below the [&hellip;]<\/p>\n","protected":false},"author":4,"featured_media":2918,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-2928","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-boshiya-blogs"],"_links":{"self":[{"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/posts\/2928","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/comments?post=2928"}],"version-history":[{"count":0,"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/posts\/2928\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/media\/2918"}],"wp:attachment":[{"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/media?parent=2928"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/categories?post=2928"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/boshiya.com\/ja\/wp-json\/wp\/v2\/tags?post=2928"}],"curies":[{"name":"wp \u3057","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}